The Best Rear View Mirror Glues (Review) in 2020

It is always a bummer when your rearview mirror falls off, mostly because it plays such a key part when...

Best Choice
Gorilla 2 Part Epoxy Glue
Gorilla 2 Part Epoxy Glue
Premium Pick
KlingON Rear View Mirror Button Kit
KlingON Rear View Mirror Button Kit
Best Value
Loctite Rearview Mirror Adhesive Kit
Loctite Rearview Mirror Adhesive Kit

It is always a bummer when your rearview mirror falls off, mostly because it plays such a key part when it comes to visibility and therefore you can’t afford to put off fixing. In most cases, you will have to act as your own handyman/woman. Luckily, glue for your rearview mirror has been created to make this job easy. They come ready for you to apply to the required surface after following a few short and simple instructions. As there are so many types available, it ultimately comes down to what you like. Below we have a list of the best rearview mirror glues, along with the best and worst things about them. It is now left it for you to do the comparing and selecting.

The Best Rear View Mirror Glue

First on our list is the Gorilla 2 Part Epoxy. This strong and durable glue can be used for both household and automotive repairs. It is incredibly versatile and can be used on steel, aluminum, glass, wood, glass, and ceramic, and it dries clear.

The Gorilla 2 Part Epoxy contains properties that make it especially suitable for rearview mirrors; it is both a superior solvent and also water resistant. Other features that make it better than the rest are its quick set time, which is about five minutes after application, and its application syringe, which the liquid easily dispenses from.

Key Features
  • Five-minute set
  • Easy to use syringe
  • Dries clear
  • Water-resistant
Specification
  • Brand Gorilla
  • Model 4200101
  • Weight 0.64 ounces
PROS

Leaves a clean finish when dry

Works on multiple surfaces

Easy to dispense

CONS

Carries strong odor

Mixing epoxy may be difficult for beginners

The mixture must all be used at once

The J-B Weld MinuteWeld Instant-Setting Epoxy Syringe is most suitable for tile but can be used on stone, glass, most plastics, wood, and metal. Its a super-strong adhesive, and once it sets it is as strong as steel. It will, therefore, work just fine on a rearview mirror. This MinuteWeld is a two-part e-poxy, so the hardener and resin are in separate parts of the tube. This is done so that the glue does not get stuck to the inside of the tube. Purchasers, therefore, are tasked with mixing the two substances, when the glue is about to be used. The mixture will thereby serve as the extra durable adhesive that will be used on the desired surface, despite the fact that it has not been created specifically for the purpose, it will rival any rear view mirror glue in the market.

Each purchase comes with one carded syringe that holds 25m of the substances. This glue is most ideal for smaller repairs and fixes, but it will also work just as well with DIYs as long as users are cautions of the instruction from the manual. Ultimately, this adhesive if used correctly will get the job done with no hassles at all.

Key Features
  • 2 part epoxy
  • Sets in 60 seconds
  • Cures in 1 hour
  • Bonds most surfaces
Specification
  • Brand J-B Weld
  • Model 50101
  • Weight 2.12 ounces
PROS

Sets super quick

Substances are easy to dispense

Works in extreme weather conditions

CONS

Can only be used for smaller attachments

Mixing epoxy’s may be tricky and result in problems with the glue

Carries a strong odor

Unlike the first two products on our list, the Versachem 11109 Rear View Mirror Adhesive, has been made specifically for rear view mirrors. There is no mixing required, so if you are not experienced in the art of DIY and mixing epoxy makes you anxious, then this is the glue for you. The Versachem works hard and fast, setting in only five minutes and staying strong through any weather condition.

The application of this product is super easy, as all you’ll have to do is undo the cap and then squeeze the tube onto the required surface. Once attached, leave overnight to dry and you would have created an extremely strong bond. Despite being primarily made for rear view mirrors, the glue can be used for jewelry, metals or ceramic, providing you with the versatility that you need. Each purchase comes with three  ounces of the substance.

Key Features
  • Sets in 5 minutes
  • Made for rear view mirrors
  • Instructions included with adhesive
  • 3 ounces per packet
Specification
  • Brand Versachem
  • Model 11109
  • Weight 3.04 ounces
PROS

Affordable

No mixing required

Durable in extreme weather conditions

CONS

Instructions need to be followed or glue may not work

May not be the best adhesive for other surfaces

A good amount of the substance needs to be used in order to work

Also created specifically for the attachment of rearview mirrors, the Loctite 37438 Rearview Mirror Adhesive Kit rivals competitors with the extra strong bond it creates. As long as you follow the instructions, the application is a relatively easy process of cleaning the required surface and applying the glue. Once dry, the adhesive comes out clean and clear leaving no trace except a well attached rear view mirror that will not budge for years.

When purchasing this product, keep in mind that it will not bond other types of materials. The Loctile adhesive will not work on plastic or ceramic. Keep into consideration the following when applying: the surface is room temperature, the surface is clean and primer has been applied, and the primer has dried. When using, there is only need for a few drops of the substance. Once you have attached the rear view mirror hold it against the glass for about 30 seconds and it should hold after that; however, make sure to allow it rest for at least 24 hours.

Key Features
  • Permanently mourns horrors to the windshield
  • Made specifically for rear view mirrors
  • Mirror mounting strength in 15 minutes
  • 1.6 ounces per purchase
Specification
  • Brand Loctite
  • Model 37438
  • Weight 0.64 ounces
PROS

Made specifically for this purpose

Dries clear

Extra strong and durable

CONS

Pricier than other glues

May cause an allergic reaction when it comes in contact with skin

Not versatile

The 3M 08752 Rearview Mirror Adhesive is a simple, two-part adhesive that will do exactly what its meant to do. It rivals other products with not only affordability but other qualities such as heat tolerance; this means, that no matter how hot it gets, this adhesive will weaken, even shortly after application. It is also humidity and moisture resistant, making it suitable for most weather conditions. The 3M 08753 is used mostly for rearview mirrors and other automotive repairs – it will most likely not work on other surfaces.

This product is also highly durable; for one, it is vibration resistant, which means it can take quite a beating as you drive. It is also impact resistant. As a two-part adhesive, the adhesive and activator are kept in separate packages; this means that some mixing of the two substances will be required before use. Whether it is for purposes of repairs or attaching a new mirror to your windshield, this product will work great.

Key Features
  • 2 part adhesive
  • Cures in 15 minutes
  • Uniquely created for its purpose
  • Comes equipped with instructions for use
Specification
  • Brand 3M
  • Model 08752
  • Weight 0.48 ounces
PROS

Weather-resistant

Resistant to vibrations and impact

Chemical resistant

CONS

May not work great for repairs on other surfaces

Mixing is required which makes for a longer application process

Adhesive is thin and watery and therefore may run

The Rugged Ridge 11021.01 Rear View Mirror Glue creates a permanent solution for your broken rear view mirror or for attaching a new mirror to your windshield. It is an extra-strong  solution, and the best part is that there is no mixing required. Also, with the rugged bridge glue you can attach and repair several other materials to varying surfaces, such as glass to glass, metal to glass, metal to metal, ceramics or jewelry.

Before use make sure you follow the directions that are on the package. Scrape any residue of previously used adhesive, clean the surface that is to be used, apply primer and leave to dry for a few minutes, and then apply the glue.  For some users this glue is great because it is easy to apply, it is fast-acting, it is durable, and overall it will do the job that you want it to at a fair price.

Key Features
  • No mixing
  • 5 minutes setting time
  • Can be used on other surfaces
  • Strong and fast-acting
Specification
  • Brand Rugged Ridge
  • Model 11021.01
  • Weight 0.32 ounces
PROS

Versatile and can be used for other surfaces

Fasting acting

Remains strong despite the weather conditions

CONS

Delivery only within the United States

A fair amount of customers have found that it does not work for them

The packaging is not great as the label is stuck over instructions.

The WORKTECH Adhesives and Sealants Professional Rearview Mirror Repair makes it on our list as a customer favorite. It is a two-part adhesive that will meet all your expectations. With this product, once your rear view mirror is attached it is going anywhere. To apply, you must first clean the surface of any dirt or adhesive residue, apply a primer, let that dry and then apply the glue after it is been mixed.

This professional-level strong adhesive cures within five minutes after application, and although it costs more than other products, most users agree it’s worth the price. After application, the mirror will not budge despite weather conditions. If you’re looking for a safe pick within our list, this may be your best bet.

Key Features
  • Two-part adhesive
  • Professional strength
  • No drip activator
  • Cures within 15 minutes
Specification
  • Brand WORKTECH Adhesives and Sealants
  • Model WORKTECH WT140
  • Weight 0.32 ounces
PROS

Fast-acting

Highly durable if applied correctly

Will hold even through extreme heat conditions.

CONS

Pricier than other adhesives

Difficult to work with

Not made for other purposes, therefore, lack versatility

The well-liked Pro-Seal Instant Adhesive, 0.01/0.02 fl. oz, Clear makes it on our list for its great qualities, such as the fact that there is no need to mix anything, it acts fast, dries clearly and holds on strong through rain, sunshine or sleet. Although this product fully cures with 24 hours, its fact-acting properties mean that the mirror can be attached and let go off almost immediately and it won’t fall off. It also holds in any weather condition due to its high thermal cycling capabilities and solvent resistance.

This product is known by most users to be durable and resistant to the vibrations and impacts that are expected from driving even just a day after application. It has been used specifically for the purposes of attaching a rear view mirror but will not work on other surfaces or materials.

Key Features
  • Two components (activator and adhesive)
  • Fully cures within 24 hours
  • Fast setting
  • Dries clear
Specification
  • Brand Pro-Seal
  • Model 61067
  • Weight 0.32 ounces
PROS

Can be applied within two minutes

Fast-acting

Weather-resistant

CONS

Will not work if instructions are not followed carefully

Cannot be used for other surfaces and is therefore not versatile

Has not worked for some customers

The Permatex 81844 Professional Strength Rearview Mirror Adhesive car mirror glue will work as a quick fix for your broken rear view mirror and can be used to attach a newly purchased mirror thanks to its professional-grade qualities. Thankfully, it is a permanent solution, which means that once you use this you can forget about buying another adhesive for years to come. To prove its professional-grade strength this product has been approved and used by GM, Ford, and Chrysler. It comes with a razor blade, a primer wiper, and an adhesive: the three main components you will need to complete the application. If followed carefully, users should have no issue with the product and it should remain durable and strong through all weather conditions. Despite the fact that this may be the most affordable product on our list, it does not hold back when it comes to getting the job done. This product ultimately makes it to our list for being affordable, professional-grade and easy to use.

Key Features
  • No mixing required
  • Cures within 15 minutes
  • Fast-acting
  • Comes equipped with activator and primer wiper
Specification
  • Brand Permatex
  • Model 81844
  • Weight 0.48 ounces
PROS

Professional grade strength

Very Affordable

Easy to use

CONS

Does not ship outside the United States

A fair amount of customers have reported that it does not work for them

Manufactured only for use to attach rear view mirrors

Although it has a high price, the KlingON Rear View Mirror Button Kit works w/ painted surfaces on Glass comes in an 8-ounce container, which is a lot more substance than most products. If you love this product, you can enjoy its leftovers for a long time.

It carries qualities such as high durability. Users have reported that the rear view mirror does not budge after application. It is also fast-acting and your mirror will remain attached if you just hold it in place for thirty seconds, although it may need an additional 24 hours to properly cure.   

To apply this product. remove any extra adhesives to the surface and then proceed to clean. Apply primer to both surfaces and then allow to dry, before apply glue, aligning the mirror and then sticking it on.

Key Features
  • No mixing required
  • Comes with both primer liquid and adhesive
  • 8 ounces in quantity
  • Dries clear
Specification
  • Brand Equalizer KlingON
  • Model KMK630
  • Weight 8 ounces
PROS

Fast-acting

Super durable

Resistant to extreme heat

CONS

Created solely for its purposed therefore may not be best for other surfaces

Pricier than most other adhesives

Users may have to vary instructions depending on weather conditions and types of vehicles

Rear View Mirror Glue Buying Guide & FAQ

Things to Consider When Buying Rear View Mirror Glue

Setting Time – A shorter setting time will make your job easier and make the application process a breeze.

Durability – The glue you are purchasing will need to withstand tough driving conditions. Therefore glues that are strong and durable enough to withstand vibrations and impacts are your best friend when it comes to attaching a rear view mirror.

Weather resistance – Because of the location of the mirror on your car, the glue you purchase will need to withstand harsh conditions. This may include extreme heat that will penetrate through your windshield glass or extremely cold conditions. To avoid, the weakening of your rear view attachment, look out for glues that are weather resistant.

Clear Drying – It is always good to purchase a glue that leaves no trace when it dries. This will result in neat results and will not leave a stain on your surface when a new glue needs to be applied. Thankfully all the glues on our list are clear drying so as long as you are taking our suggestions, you have nothing to worry about.

Rearview Mirror Adhesive Kit

Benefits of Rearview Mirror Adhesive

  • Makes for an easy DIY
  • Relatively safe to use
  • Can double as super glue for other household products and repairs

Different Kinds of Rear View Mirror Glue

  • Two-part, mixing glues – This consists of both a resin and a hardener
  • Single non-mixing glues – Resin and hardener are already premixed
  • Clear liquid rear view mirror glues – This type of glue is specially designed for rear view mirrors. In composition, they are similar to the above two but comes in clear color.

Mirror Glue vs. Super Glue

The main difference between the two is that one has been made specifically for a purpose and the other doubles as a solution to your broken rear view mirror. Each, however, comes with its benefits. The rear view mirror glue has been manufactured specifically to consider all the factors necessary to make it work in a car. Understanding that cars are often subjected to tough conditions whether due to the surface they drive on or the weather conditions they are left in, these glues are made super durable. The biggest and most obvious disadvantage of this is that once it had done its job, the residual glue left cannot be used for most other things.

Just because super glues are not made specifically for rear view mirrors does not mean that they are no strong enough. In fact most super glues will rival the strength of mirror glues, however, it is always a gamble considering they have not been manufactured to consider all the elements. The biggest benefit of purchasing an ordinary super glue for rear view mirror is that once the mirror is attached you can go on to use the remainder for other purposes.

Overall, whichever glue you choose is up to you and at the end of the day the choice may not be about whether or not it has been specifically made to attach rear view mirrors, but the brand, the price and also the reviews from customers who have used the product.

Best Rear View Mirror Glue FAQ:

Q: How long does it take for a rear view mirror glue to dry?

A: This will largely depend on the product that you purchase, however, it should not take more than 5 minutes for most products. Once you attach the rear view mirror, keep in mind that you will need to leave it for at least another 24 hours before it is probably dry and stuck on.

Q:  Does rear view mirror adhesive work on plastic?

A: Again this will largely depend on the product you have purchased. Most rear view mirror glues are manufactured however to only work on the required surface, so glass. If you purchase the right one that yes you may be lucky enough to find that it works on plastic. However, for most rear view mirror glues on our list, plastic is just not a surface they work on.

Q: Can I use a glue for a rear view mirror without the activator?

A: There is probably a reason that companies include activators inside the package of the glue. To put it simply the answer is no, activators are a necessary component to property attach the mirrors onto the dashboard. However, in some cases with single part glues, activators are not necessary.

looking at rear view mirror

Our Top Pick

Overall, although all these products are great and we depending on what you require you may prefer any one of them, our pick for the best rear view mirror adhesive is the Gorilla 2 Part Epoxy. Although it is not perfect and requires some mixing and has some left a few unhappy customers, this product seems to carry qualities that render it unbeatable. It is decently priced while remaining strong and durable, which is of course very important, as well as, it is a safe pick and will most definitely do the job when used correctly, just make sure to follow the instructions. The best part is, it can be used for other household repairs right after.

Sources:

  1. Rear View Mirror Replacement Service – Your Mechanic
  2. How will Gorilla Glue work attaching a rear-view mirror back to the windshield? – Quora